Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WRVS4400 - reserve DHCP?

i am looking at upgrading to this router

i would like to reserve some DHCP addresses, but i looked through the manual & didn't see it mentioned, but i did see it mentioned in 1 of the firmware upgrades

is it available?

mark

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions

WRVS4400 - reserve DHCP?

Yes, you can.

9 REPLIES

WRVS4400 - reserve DHCP?

Mark, all RV series routers, including WRVS4400N, support this feature.

New Member

WRVS4400 - reserve DHCP?

thanks for the quick answer

not sure if you can answer this one - i see the WRVS4400n and V2 for sale, is there a difference other than the VPN supported?

mark

Re: WRVS4400 - reserve DHCP?

WRVS4400N v1.1 and WRVS4400N v2 have the same features, although the underlined WiFi chips used are different.

The only practical difference is that the former was manufactured in earlier days.

New Member

WRVS4400 - reserve DHCP?

i have the router now

can you please explain how to do it

i see how to enter fixed IP's, but i don't see how to reserve a DHCP address

i want the same MAC address to get the same IP from DHCP each time

mark

WRVS4400 - reserve DHCP?

Does the router has the latest firmware? The Reserved DHCP feature is usually available as part of the DHCP Server configuration.

New Member

WRVS4400 - reserve DHCP?

yes, just installed 2.0.2.1

mark

WRVS4400 - reserve DHCP?

Please checkout the following page on the Web GUI.

Setup>LAN>Static IP Mapping

New Member

WRVS4400 - reserve DHCP?

i used this to define a static address outside the normal DHCP range

i can define an address within the DHCP range?

mark

WRVS4400 - reserve DHCP?

Yes, you can.

958
Views
0
Helpful
9
Replies
CreatePlease to create content