I'm experiencing problems with this model, if I try to upgrade my router from 1.00.09 to the 1.1.3 that appears in Cisco web. It rejects the firmware claiming that it's wrong file format, I double check the integrity of the file and even upload the exact same file to a WRVS4400N hardware version 1 with no problems. At this point I guess if there's any alternative firmware version not available in any regular channel.
Hello, This article will describe how to configure PPTP VPN on the new
RV340/345 routers from the Small Business series. RV340/345
Configuration The first step is to enable the PPTP Server: Go to VPN ->
PPTP Server Change PPTP Server: from Off to On Selec...
Article ID:5748 Use TheGreenBow VPN Client to Connect with RV34x Series
Router Introduction A Virtual Private Network (VPN) connection allows
users to access, send, and receive data to and from a private network by
means of going through a public or share...
Article ID:5728 Configure a Teleworker VPN Client on the RV34x Series
Router Objective The Teleworker VPN Client feature minimizes the
configuration requirements at remote locations by allowing the device to
work as a Cisco VPN hardware client. When the T...