My customer has a WRVS4400N from November 2011 running the latest V220.127.116.11 firmware. I've looked through settings and tried a couple things, but no matter what... I cannot achieve faster than 25 Mbps Download. We also added a D-Link for a Fonality VoIP system and anything connected through that router can get 50 Mbps.
Is there any reason this Cisco would not be able to download at 50 Mbps?
My comment about changing brands wasn't because of the speed limitation... It was the support limitation.
I called in for help / questions and was told my "Lifetime Warranty" product carries no support / ability to HELP DETERMINE if I have a defective unit. NETGEAR has helped me without a problem in the past on 5 year old ProSafe routers.
In this situation, I did replace the clients router with an RV180W and have no issues achieving beyond 50 Mbps.
You can run into the same thing with Netgear (which I did on two units covered under a lifetime warranty). The only time you'll get service like what you're describing is when you move into the more expensive world of enterprise routers.
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
** Update **These and a number of other issues have been addressed in
SRP520 MR3. Please see https://supportforums.cisco.com/docs/DOC-13853
for details on how to access this code.There have been a number of
reports of the SRP500 becoming unresponsive afte...
STANDARDSOURCECOMMENTSEthernet RJ-45 connector pin number12345678IEEE
802.3afusing data pairsRXDC+RXDC+TXDC-sparespareTXDC-sparespareIndustry
Standard for Embedded POE(used by Cisco Catalyst Switches)IEEE
802.3afusing spare pairs RXRXTXDC+DC+TXDC-DC-Indus...