I have had my Linksys/Cisco WRVS4400N for just under a year now and recently it started to have some major issues.
1) The wireless completly died on it a few months ago (I have other AP's, but liked the N on this one). I have tested it multiple times with different cards/machines. The network apears and disapears, you can never sucessfully connect. This happens in N-G-B, 10ft away or 100ft away.
2) The unit (V1.0) has started to make a loud buzzing sound. Rather annoying as its in the Bedroom closet.
Is this still under warranty? I bought it from a retailer around 10 months ago, but long lost the reciept.
The WRVS4400N has a 3 year manufacturers warranty so it appears that you are within the warranty period. To begin the process, if you are not a registered VAR, please contact our support team at 800-326-7114 so they can authorize a return.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...