cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1156
Views
0
Helpful
3
Replies

WRVS4400N QVPN to OS X 10.9 with IPSecuritas 4rc

Serge Stikine
Level 1
Level 1

Hi folks,

I have a problem with seting up working tunnel between WRVS4400N and my mac. As client software I am using IPSecuritas 4rc. I have succesfully created tunnel, I can ping any host but cannot access it from brouser.

Here is screen shot from WRVS4400N IPSec section

Screen Shot 2014-01-30 at 23.41.09.png

Screen-Shot-5.jpg

IPSecuritas config:

Screen-Shot-4.jpg

It doesn't work.

I will appreciate for any advise or idea. Thank you.

3 Replies 3

mpyhala
Level 7
Level 7

Serge,

I'm a little confused about what is/is not working.

"I can ping any host but cannot access it from brouser."

If you can ping any host, then the tunnel is successful. You cannot reach the web browser of the router? Can you access shares on the computers?

- Marty

This is how it is looks like:

MBP2:~ user$ traceroute 192.168.1.13

traceroute to 192.168.1.13 (192.168.1.13), 64 hops max, 52 byte packets

1  * * *

2  * *^C

MBP2:~ user$ ping 192.168.1.13

PING 192.168.1.13 (192.168.1.13): 56 data bytes

Request timeout for icmp_seq 0

....

Request timeout for icmp_seq 4

^C

--- 192.168.1.13 ping statistics ---

6 packets transmitted, 0 packets received, 100.0% packet loss

MBP2:~ user$ ping 192.168.1.14

PING 192.168.1.14 (192.168.1.14): 56 data bytes

Request timeout for icmp_seq 0

Request timeout for icmp_seq 1

^C

--- 192.168.1.14 ping statistics ---

3 packets transmitted, 0 packets received, 100.0% packet loss

MBP2:~user$ ping 192.168.1.1

PING 192.168.1.1 (192.168.1.1): 56 data bytes

64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=148.457 ms

64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=149.230 ms

^C

--- 192.168.1.1 ping statistics ---

4 packets transmitted, 3 packets received, 25.0% packet loss

round-trip min/avg/max/stddev = 148.457/149.375/150.437/0.815 ms

MBP2:~ user$ nmap -sP 192.168.1.0/27

Starting Nmap 6.40-2 ( http://nmap.org ) at 2014-01-030 13:14 EST

Nmap scan report for 192.168.1.1

Host is up (0.15s latency).

Nmap scan report for 192.168.1.2

Host is up (0.18s latency).

Nmap scan report for 192.168.1.10

Host is up (0.17s latency).

Nmap scan report for 192.168.1.11

Host is up (0.17s latency).

Nmap scan report for 192.168.1.12

Host is up (0.19s latency).

Nmap scan report for 192.168.1.13

Host is up (0.16s latency).

Nmap done: 32 IP addresses (6 hosts up) scanned in 3.92 seconds

And from Firefox:

The connection has timed out

The server at 192.168.1.1 is taking too long to respond.

Routing table "other site of the tunnel"

Routing Table Entry List
Destination LAN IP Subnet Mask Gateway Interface
192.168.1.0255.255.255.2240.0.0.0LAN
76.15.128.0255.255.252.00.0.0.0WAN
0.0.0.00.0.0.076.15.128.1WAN

My site:

MBP2:~ user$ netstat -r

Routing tables

Internet:

Destination          Gateway            Flags        Refs      Use   Netif Expire

default             172.16.254.254     UGSc           13       19     en1

127                  localhost          UCS             0        0     lo0

localhost          localhost          UH              3     4629     lo0

169.254            link#5             UCS             0        0     en1

172.16.254.240/28  link#5             UCS             1        0     en1

172.16.254.241     localhost          UHS             0        3     lo0

172.16.254.254     4c:60:de:e7:ad:f3  UHLWIir        14      409     en1   1159

Serge,

You can ping the router and nothing else?

- Marty

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: