Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WRVS4400N - VPN Tunnel between 2 locations


I have establlished VPN tunnle between 2 locations

I can ping accros and access server resources on both LANs

The problem is that from one location I can not access Internet

I can not ping by IP,when I do tracert it just reaches default gateway of this locations

from other location(office) no problem

any suggestions will be appreciated?

Thank you


WRVS4400N - VPN Tunnel between 2 locations

Hi Eugen,

Thank you for participating in the Small Business support community. My name is Nico Muselle from Cisco Sofia SBSC.

You might want to check the remote subnet settings in the IPSec policy on the site that does not have internet access. Seems to me like you are sending all traffic through the tunnel, which might explain why you don't have internet access and why the traffic drops at the default gateway (the remote site is not expecting this traffic and thus drops it)

If you would have any other issues, do not hesitate to contact your local Small Business Support Center. Numbers can be found here

Hope this helps !

Nico Muselle
Sr. Network Engineer - CCNA - CCNA Security