Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WRVS4400Nv2 VPN Keepalive.

Hello Cisco Community,

Have a question related to the router mentioned in the subject, and we are wondering on how to enable Keepalive and DPD

We are using the following firmware V1.00.09-ETSI, and we can not see this options under the VPN Tunnel Configuration.

Thank you!

Victor.-

1 ACCEPTED SOLUTION

Accepted Solutions

Re: WRVS4400Nv2 VPN Keepalive.

WRVS4400N does not support Dead Peer Detection. Whenever the router finds the tunnel dead when there is an outgoing packet from the local to the remote subnets, it will try to reconnect the tunnel.

1 REPLY

Re: WRVS4400Nv2 VPN Keepalive.

WRVS4400N does not support Dead Peer Detection. Whenever the router finds the tunnel dead when there is an outgoing packet from the local to the remote subnets, it will try to reconnect the tunnel.

2637
Views
0
Helpful
1
Replies
CreatePlease to create content