I know that the UC520, UC540, UC560, SR520, ASA5505, and many of the ISR models support SSL VPNs. I also know that SPA525G phones and the Cisco IP Communicator softphone can connect to a UC500 over an AnyConnect SSL VPN connection. Currently, the SPA525G requires AnyConnect SSL VPN protocol support in order to be connected via a SSL VPN, whereas Cisco IP Communicator can use Easy VPN or L2TP over IPsec VPN connections. Will there be support for the AnyConnect SSL VPN protocol on the SA500 in the future?
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...