Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Assistance Configuring a IPSec Gateway-to-gateway tunnel ASA 5505 using ASDM

I am a local tech that has never worked with Cisco routers and appliances; however, I am having some trouble knowing where to enter parameters to setup a VPN to a remote site to access an application.

We were provided the following information:

Our gateway: 216.115.92.133 Mode: Main (not Aggressive)
Phase 1: AES128, SHA, DH Group 2, Lifetime 28800
Phase 2: AES128, SHA, DH Group 2, Lifetime 3600, PFS Enabled
Selector policy for interesting traffic: Your assigned subnet (172.19.115.0/26) <-> Our Subnet (192.168.5.96/27)

If anyone can provide some direction or assistance, it would be greatly appreciated.

Everyone's tags (1)
1 REPLY

Hi , Look into below URL for

30
Views
0
Helpful
1
Replies