I cannot seem to get the most basic port forwarding configuration to work.
New purchase of a SA 520W ... upgraded firmware to 1.1.65
Outbound Traffic is fine
Want to set up inbound port forwarding for SMTP to Lotus Domino 6.5.1 server
1st tried - Firewall rule from Dedicated WAN to internal IP address for SMTP - (SMTP check on MX tools times out)
2nd tried - IP Alias for Dedicated Wan - then Inbound rule to allow all outbound traffic for IP Alias - Then Firewall Rule for Inbound SMTP to internal IP via IP Alias - (SMTP check on MX Tools states - Connection refused for policy reasons)
Just try to telnet into port 25 from an outside machine. Sometimes if the firewall is doing advanced blocking, it can ruin programs that try and do extended testing of the port. You should get a "HELO" from the mail server..
Try posting your configuration PICS for us to see it.
Reboot and Factory Default Reset on ISA500 Series Integrated Security Appliances
Reboot or restart of the network device is made when certain changes in the settings need reboot or if the device is frozen. The configuration...
WAN Quality of Service (QoS) Policy Profiles Settings on ISA500 Series Integrated Security Appliances
Wide Area Network (WAN) Quality of Service (QoS) policy profiles manage traffic through classed-based profiles. These pro...
Cisco QuickVPN Installation Tips for Windows Operating Systems
For a video showing installation tips on Quick VPN, visit http://youtu.be/hHu2z6A78N8
Cisco QuickVPN is a free software designed for remote access to a ne...