Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

dyndns.org support on the SR520-FE-K9?

Hi folks,

I have a customer who has users in multiple homes all across the country.  They utilize dyndns.org to have all of the routers report back to their account, so when they need to remote into the routers, if the public IP has changed, they can just map to it.  Could someone confirm the 520 will allow the customers to setup their account information to be able to use dyndns.org?  I read http://www.cisco.com/en/US/partner/docs/ios/ipaddr/configuration/guide/iad_ddns_ps6441_TSD_Products_Configuration_Guide_Chapter.html

and noticed that IOS does support dyndns.org by command line interface, but the customer really wants a GUI.  Is there another product I should be recommending?

I read a month or so ago that CCA cannot currently support dyndns.org and the feature is slated for the 2.1 release, but is there a workaround? 

I'm up against D-Link's DFL-210 and need to make sure I address the customer's number one concern (GUI dyndns.org support).  D-Link is saying they have a dyndns.org client integrated in the firmware for all of the DFL series firewalls.  Any competitive information on this product that would benefit?

Thanks!

Christine

Everyone's tags (3)
3 REPLIES
New Member

Re: dyndns.org support on the SR520-FE-K9?

“Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main  This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.”

- Routers ----> Network Infrastructure Forum http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Network_Infrastructure_discussion

Cisco Employee

Re: dyndns.org support on the SR520-FE-K9?

Actualy, the SR500 series of routers is part of the Small Business portfolio, so this is a legitimate place to post the question.

To answer the specific question, you are pretty much correct in all particulars.  Dyndns.org can be supported using CLI, and is currently planned for support through the GUI in the next release of CCA.  In the interim, you can use CLI to configure the functionality.

Cheers,

Dave.

New Member

Re: dyndns.org support on the SR520-FE-K9?

A colleague just created this great document:

https://www.myciscocommunity.com/docs/DOC-9152

Let us know if it helps.

Thanks,


Marcos

3876
Views
0
Helpful
3
Replies
CreatePlease to create content