Is there anyone who have the Captive Portal working properly with a FQDN approved certificate ? I have already installed a approved certifiacte but each time the client is redirected to the Captive Portal default ip address on the ISA router used. Is there any option where it will redirect to a FQDN example the host and domain name of the router - insted of the routers ip adress ?
Hi Tonni, thank you for using our forum, my name is Luis I am part of the Small business Support community. I apologize for your inconvenience, in this case I found an article and I thought that could be helpful in order to configure your Captive Portal.
Reboot and Factory Default Reset on ISA500 Series Integrated Security Appliances
Reboot or restart of the network device is made when certain changes in the settings need reboot or if the device is frozen. The configuration...
WAN Quality of Service (QoS) Policy Profiles Settings on ISA500 Series Integrated Security Appliances
Wide Area Network (WAN) Quality of Service (QoS) policy profiles manage traffic through classed-based profiles. These pro...
Cisco QuickVPN Installation Tips for Windows Operating Systems
For a video showing installation tips on Quick VPN, visit http://youtu.be/hHu2z6A78N8
Cisco QuickVPN is a free software designed for remote access to a ne...