I'm trying to set remote VPN connection to my factory's netowrk using IPsec VPN, I followed IPsec VPN creation wizard with the following information:
Internal protected network: 192.168.1.* ISA500 LAN IP: 192.168.1.3 ISA500 WAN IP: 192.168.75.3 (connected to ADSL router)
ISA500 gateway: 192.168.75.1 (ADSL router IP) ADSL router internal IP: 192.168.75.1 (connected to ISA500) ADSL router external IP: our public IP
IPsec information: IKE authentication method: pre-shared key Pool range for client LAN: 192.168.85.100 - 192.168.85.200 Zone access control: Permitted to all zones Primary DNS: 192.168.1.12 No split tunnel or split DNS configured
Using Cisco VPN client from external netowrk, I can connect and authenticate successfully to the ISA500, so I'm VPN connected.
Reboot and Factory Default Reset on ISA500 Series Integrated Security Appliances
Reboot or restart of the network device is made when certain changes in the settings need reboot or if the device is frozen. The configuration...
WAN Quality of Service (QoS) Policy Profiles Settings on ISA500 Series Integrated Security Appliances
Wide Area Network (WAN) Quality of Service (QoS) policy profiles manage traffic through classed-based profiles. These pro...
Cisco QuickVPN Installation Tips for Windows Operating Systems
For a video showing installation tips on Quick VPN, visit http://youtu.be/hHu2z6A78N8
Cisco QuickVPN is a free software designed for remote access to a ne...