I have an ISA550 router at both ends of the IPSec site-to-site tunnel with the following network configurations:
Site A Network: 192.168.1.0/24
Site B Network: 192.168.2.0/24
I ran the configuration wizard to setup the tunnel and used the default settings (I added the remote and local address objects but used the default IKE and Transform). The tunnel is up and I can ping the ISA550 on each end of the tunnel but I can NOT ping anything else on the network on the oppisite end of the tunnel. Any ideas on how to resolve this issue? Did I miss something?
Can you be more specific about what you are trying to ping? Are all of the devices PCs? In many cases we see issues with the Windows Firewall blocking traffic from a different subnet and a rule needs to be created.
Captive portal is an additional authentication step that can used for
both guests and authenticated users. Clients will see a special web page
for authentication purposes before they are allowed to use the internet
normally. Captive portal makes use of th...
ISA500 series small business integrated security appliances can be
accessed, monitored and managed remotely. The below articles will give
you an insight of remote administration settings on ISA500 series
devicesCisco OnPlus Settings on ISA500 Series Integ...
A VPN or Virtual Private Network is a secure network over an unsecure
environment like internet. The VPN allows the remote clients to access
the internal network resources (private network) over the Internet
(public). These are the most common VPN article...