Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

More ports for Static PAT

Hi, on the ASA 5505 is impossible configure on the static PAT more ports but also is impossible to use Service Groups.

I have this situation:

- internal mail server that use pop3 and smtp port, the IP Address is 192.168.1.80

- two public IP address, one is configured on interface Vlan2 and the second public IP address is used for PAT with internal mail server, therefore:

interface vlan2 --> 88.88.88.88

private IP mail server --> 192.168.1.80

public IP mail server --> 88.88.88.89

now I have in the ASA config file:

static (inside,outside) 88.88.88.89 192.168.1.80 netmask 255.255.255.255


but I can specify tcp/25 and tcp/110 on this static PAT ?

Thanks.

-

Salvatore.

1 REPLY

Re: More ports for Static PAT

I would recommend posting in the netpro community for this.

http://www.cisco.com/go/netpro

558
Views
0
Helpful
1
Replies