Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NAT and ASA 5505

Hi, I tring to pass from 192.168.202.77 (VLAN1) to web interface 192.168.20.12(VLAN4)

Here is a configuration

!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.202.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address ***.***.***.*** 255.255.255.248
!
interface Vlan3
nameif dmz
security-level 50
no ip address
!
interface Vlan4
nameif wi-fi
security-level 60
ip address 192.168.20.1 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 3
!
interface Ethernet0/4
switchport access vlan 4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7

...

access-list inside_access_in extended permit tcp host 192.168.202.77 host 192.168.20.12
access-list wi-fi extended permit tcp host 192.168.20.12 host 192.168.202.77
...
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
access-group wi-fi in interface wi-fi
...
static (inside,wi-fi) 192.168.20.12 192.168.202.77 netmask 255.255.255.255
static (wi-fi,inside) 192.168.202.77 192.168.20.12 netmask 255.255.255.255
...

Tell me please, what is the problem?

1 REPLY

Re: NAT and ASA 5505

This community doesn't support the ASA boxes.  I would recommend trying netpro...

http://www.cisco.com/go/netpro

432
Views
0
Helpful
1
Replies