Opening a second http port on Cisco router and ASA 5505
I have a cisco router and ASA. The internet link connects to the router first and then to firewall. I have two internal web servers one of them is HTTPS and one is http. 192.168.11.112 is my HTTPS email server and currently it can be accessed from outside. I have another web application that i want also to be accessed fro outside but i am having challenges. internally it is accessed like : 192.168.11.7:86/application.
My router Configs are :
Router_HQ #sh run
ip address 10.1.1.1 255.255.255.248
ip nat inside
description LINK TO ISP
ip address 184.108.40.206 255.255.255.252
ip nat outside
crypto map VPN
ip forward-protocol nd
no ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
If the service is currently listening on TCP port 86 - and you would like inbound connections via the Internet to use TCP port 80 (HTTP) - then you would need to NAT inbound connections from 80 to 86 on your Cisco router and permit that port on both your devices.
Article ID:3091 Reboot and Factory Default Reset on ISA500 Series
Integrated Security Appliances Objective Reboot or restart of the
network device is made when certain changes in the settings need reboot
or if the device is frozen. The configuration setti...
Article ID:3403 WAN Quality of Service (QoS) Policy Profiles Settings on
ISA500 Series Integrated Security Appliances Objective Wide Area Network
(WAN) Quality of Service (QoS) policy profiles manage traffic through
classed-based profiles. These profiles ...
Article ID:2922 Cisco QuickVPN Installation Tips for Windows Operating
Systems For a video showing installation tips on Quick VPN, visit
http://youtu.be/hHu2z6A78N8 Objective Cisco QuickVPN is a free software
designed for remote access to a network. It is...