Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SA 520 Multiple subnets on one VLAN?

I'm posting just to make sure...

There seems to be NO WAY to put disjointed subnets on the same VLAN ID.  The web based config limits it to ONE subnet ber VLAN, and I know that the underlying OS can do more.

What I was trying to do is this:

VLAN 1 - Default  - subnet 192.68.75.x  (used as deadspace)

VLAN 20 - Data  - subnet 192.168.20.x   AND 10.0.20.x

VLAN 100 VoIP - subnet 10.10.20.x

There's no way that I can see to put both of those subnets on VLAN 20.  Yes, I can say that I'd like to create a fourth VLAN for the odd subnet, but some design issues are beyond my control.

I'd like to be using an ASA, but I wasn't involved in the original hardware purchase.

Has anyone found a workaroud for this type of config?

Any pointers would be appreciated.

--

Larry

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

SA 520 Multiple subnets on one VLAN?

Hi -

Unfortunately that is going to be a limitation of the SA series. You can only configure one subnet per VLAN.

Wish I had better news.

Regards,

Russ

2 REPLIES
New Member

SA 520 Multiple subnets on one VLAN?

Hi -

Unfortunately that is going to be a limitation of the SA series. You can only configure one subnet per VLAN.

Wish I had better news.

Regards,

Russ

New Member

SA 520 Multiple subnets on one VLAN?

Thanks for the official 'Thumbs Down' on this issue.

I won't be recommending this unit to anyone else in the future, for sure!

1538
Views
0
Helpful
2
Replies