I was doing some testing and looking into setting up a RADIUS server to authenticate who administers the SA 540 like you could the ASA 5505. With the ASA 5505 you have to have the RADIUS Server send back a shell:priv-lvl=15 command. I assume this is not the same as this appliance does not seem to use the same type of commans that IOS took. My question is 1. Can you set up the SA 540 administration to use RADIUS. and 2. How do you set that up on the Windows side in either IAS (2003) or NPS (2008)?
Article ID:3091 Reboot and Factory Default Reset on ISA500 Series
Integrated Security Appliances Objective Reboot or restart of the
network device is made when certain changes in the settings need reboot
or if the device is frozen. The configuration setti...
Article ID:3403 WAN Quality of Service (QoS) Policy Profiles Settings on
ISA500 Series Integrated Security Appliances Objective Wide Area Network
(WAN) Quality of Service (QoS) policy profiles manage traffic through
classed-based profiles. These profiles ...
Article ID:2922 Cisco QuickVPN Installation Tips for Windows Operating
Systems For a video showing installation tips on Quick VPN, visit
http://youtu.be/hHu2z6A78N8 Objective Cisco QuickVPN is a free software
designed for remote access to a network. It is...