On SA500 you can use SSL VPN Policies under VPN -> SSL VPN Server -> SSL VPN Policies.
1. For the user who need to access the entire private network, you can use full SSL VPN Tunnel.
2. For the user who needs to access only 1 IP address, you can use port forwarding. Under VPN -> SSL VPN Server -> SSL VPN Policies, select the user and hit 'Display' button. Add a SSL VPN Policy where allow the user to use only one IP address and deny the rest of your private network.
3. For the user who needs to access 5 IP address, you can again use port forwarding with the above step repeated for 5 addresses or you can use 'Resources'. Create a Resource and add objects to it (IP address you want to access). Then call this resource using SSL VPN Policies. You will need to deny rest of the private network incase you only need access to 5 IP addresses.
Reboot and Factory Default Reset on ISA500 Series Integrated Security Appliances
Reboot or restart of the network device is made when certain changes in the settings need reboot or if the device is frozen. The configuration...
WAN Quality of Service (QoS) Policy Profiles Settings on ISA500 Series Integrated Security Appliances
Wide Area Network (WAN) Quality of Service (QoS) policy profiles manage traffic through classed-based profiles. These pro...
Cisco QuickVPN Installation Tips for Windows Operating Systems
For a video showing installation tips on Quick VPN, visit http://youtu.be/hHu2z6A78N8
Cisco QuickVPN is a free software designed for remote access to a ne...