Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SA520 with multi vlan

Hi guys,

I am just doing some workup on a new sa520.  I have setup 2 additional vlan's.  When I plug in workstations into the vlan, I get a dhcp ip address, but there doesn't seem to be any way for me to configure dhcp settings for the additional 2 vlans.  Am I doing something wrong, or is it a failing with the user interface?

Thanks all!

Chris

Everyone's tags (2)
4 REPLIES
New Member

Re: SA520 with multi vlan

Please advise what version firmware is on your SA500 appliance.

Re: SA520 with multi vlan

Look under the multiple vlan subnets item.  It is under Networking.

Also, this is available starting in 1.0.39 firmware.  I would recommend using 1.1.21 firmware.  Note, either upgrade will cause a factory reset.

New Member

Re: SA520 with multi vlan

Steve,

Thanks for your response.  I must have missed this when I was going through the settings.  I am using the latest firmware.

Thanks!

Re: SA520 with multi vlan

I missed it one of the first time I was using the product as well.  Glad you have it now.

935
Views
0
Helpful
4
Replies