We have a customer with 2 xDSL lines. One is for voice, while the other is for data. There is a switch and router for each. I would like to consolidate this so that there is a single switch, with the phones in one VLAN and the computers in another. Is it possible to apply routing on the SA520W so that it passes all traffic from the voice VLAN to the voice router and data to the data router?
Please see below. I appreciate some may not be totally correct but I'm still _working_ it out. The VoIP router is a Cisco 857, and the data router is actually a Zyxel Modem. The switch is a Cisco SF 300-24P.
Give us a call @ 1-866-606-1866 and speak with next available engineer (advise them its presales) Looking over your topology there is a few scenarios we could suggest or implement. Have the engineer consult with me and advise them to this support forum.
Reboot and Factory Default Reset on ISA500 Series Integrated Security Appliances
Reboot or restart of the network device is made when certain changes in the settings need reboot or if the device is frozen. The configuration...
WAN Quality of Service (QoS) Policy Profiles Settings on ISA500 Series Integrated Security Appliances
Wide Area Network (WAN) Quality of Service (QoS) policy profiles manage traffic through classed-based profiles. These pro...
Cisco QuickVPN Installation Tips for Windows Operating Systems
For a video showing installation tips on Quick VPN, visit http://youtu.be/hHu2z6A78N8
Cisco QuickVPN is a free software designed for remote access to a ne...