Tom, Sort of. It has an option to enable a Syslog and Outbound Blocking Event Log; however they would need to be running a remote logging server to get this. Nothing too complicated but would need to be configured internally for them to pull the details from. From there they can view the log files (System, Access, Firewall and VPN logs) page by page as an Administrator to the Protectlink GW app. (View Logs>Policy Enforcement Logs).
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...