Unable to ping or poll snmp from the WAN interface of SA520 and SA540
We are having this problem on two firewalls, both are running Firmware 1.1.21. The check box for "Block Ping to WAN interface" has been cleared and SNMP has been enabled and configured under the Network Management Section per the Admin Guide. When we attempt to ping the following is logged on the firewall "
[firewall] LOG_PACKET[DROP] IN=WAN OUT=SELF SRC=x.x.x.x DST=x.x.x.x PROTO=ICMP TYPE=8 CODE=0", however when i poll the SNMP with our monitoring tool, nothing is logged.
Re: Unable to ping or poll snmp from the WAN interface of SA520
I am using Solarwinds Orion but have also tried to poll with Solarwinds Toolset (MIB Viewer, MIB Walk). I also downloaded and tried Paessler SNMP Tester. I have tried both SNMPv1 and SNMPv2. The only errors I get are "the node does not respond" or "No Response".
Just tried snmpwalk and and get "Timeout: No Response from x.x.x.x"
Reboot and Factory Default Reset on ISA500 Series Integrated Security Appliances
Reboot or restart of the network device is made when certain changes in the settings need reboot or if the device is frozen. The configuration...
WAN Quality of Service (QoS) Policy Profiles Settings on ISA500 Series Integrated Security Appliances
Wide Area Network (WAN) Quality of Service (QoS) policy profiles manage traffic through classed-based profiles. These pro...
Cisco QuickVPN Installation Tips for Windows Operating Systems
For a video showing installation tips on Quick VPN, visit http://youtu.be/hHu2z6A78N8
Cisco QuickVPN is a free software designed for remote access to a ne...