Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Default Settings on Cisco ESW 500 Series switches

Default Configuration settings on the ESW 500 Series


The ESW 500 series switches ship with a default configuration that enables simplified installation and plug and play when connected into a Cisco Small
Business network such as SBCS. The default settings are as follows:

  • Management VLAN is VLAN 1
  • Management IP Address is obtained via DHCP by default. If the switch times out on a Dynamic Host Configuration Protocol (DHCP) response, it falls back to a static IP address 192.168.10.2 with subnet mask of 255.255.255.0.
  • Voice VLAN is VLAN 100
  • Cisco Discovery Protocol (CDP) is enabled on all ports
  • Default Smartport roles are as below:

Slide 1

ESW500 Series SKU
Layer 2 switch ports
Uplink ports
Desktop SmartPorts Role
Desktop + IP Phone SmartPorts Role
Switch SmartPorts Role
ESW-520-24-K9
e1 – e24
  NA
g1 – g4
ESW-520-24P-K9
NA
e1 – e24
g1 – g4
ESW-520-48-K9
e1 – e48
NA
g1 – g4
ESW-520-48P-K9
NA
e1 – e48
g1 – g4
ESW-540-24-K9
g1 – g10, g13 – g22
NA
g11 – g12, g23 – g24
ESW-540-24P-K9
NA
g1 – g10, g13 – g22
g11 – g12, g23 – g24
ESW-540-48-K9
g1 – g22, g25 – g46
    NA
g23 – g24, g47 – g48

Version history
Revision #:
1 of 1
Last update:
‎06-08-2009 10:31 PM
Updated by:
 
Labels (1)