Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

How to configure static MAC port security on SX300

Here is how to configure static MAC address port security for SX300 series running

the 1.2.7.76 code

1.) Device the desired switch interface as a locked interface and specify the action on violation, in this example I chose shutdown for interface FE1

port_security.JPG

2.) Create a static MAC entry on the interface, on this example, using FE1. Notice the command prompt, the last block is ED and on the MAC address entry I chose EE. The configuration should include the MAC address that you expect connecting to the port.

static_mac.JPG

الوليد

3.) Verify the static MAC entry

mac_entry.JPG

4.) Connect a computer to the port. If the MAC address matches, the port will not shut down. If the MAC address deviates, the port will shut down.

Join Ethical Hacking Course for more Information

verify_violation.JPG

Save

Save

5031
Views
0
Helpful
0
Comments