Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

PAP2T: Saving a PAP2T's Configuration

Ever wonder how you can send a PAP2T's configuration to someone for analysis?

It's simple and is done in a few seconds.

You'll need:

  - Device's IP address

[Don't know the IP address? Connect an analog phone to the first phone port, dial **** then dial 110# to hear the IP address announced]

  - Computer with network access  to the device

  - Administration password for device [if set]

  - WAN access to the device's administration web server

[Using the IVR, dial ****, 7932#, 1 to enable]

[View with Web-UI: System tab > System Configuration > Enable Web Server: yes]

Saving the PAP2T's configuration:

1. Direct your browser to http://<IP_of_device>/admin/advanced

2. Use your browser's save page feature to write the device's entire Voice configuration to a single file:

      • IE: Page > Save As > Save as type Webpage, HTML only
      • FireFox: File > Save Page As > Save as type Web Page, complete
      • Chrome: Save page as > Web Page, Complete [Ctrl-S]

3. Name the file as follows: PAP2T_date_time.html

Example: PAP2T_Sep012009_08h45.html

Now you can send the PAP2T_Sep012009_08h45.html file to someone in order to show them how you have configured the device. Don't worry, they cannot access your device's passwords.

<end>

8271
Views
0
Helpful
0
Comments