Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Security Configuration on Sx500 Series Stackable Switches

Security is of paramount importance in any network. You can achieved the desired security level on the Sx500 Series Stackable Switches in different ways. Security can be done per port basis, using the 802.1x protocol. Also, users can be authenticated in the network, this can be done via a TACACS+ or RADIUS server properly configured on the switch. Finally, data security can be achieved to ensure data such as passwords and encryption keys to properly be installed in different devices within the network. This document offers the different security configurations that can be done via Graphical User Interface (GUI) on the Sx500 Series Stackable Switches.

Security configuration articles:

Configure Time Range for 802.1x on SG500X Series Stackable Switches

Configuration of 802.1x Properties on Sx500 Series Stackable Switches

802.1x Host and Session Authentication on Sx500 Series Stackable Switches

Secure Sensitive Data (SSD) Rules Configuration on Sx500 Series Stackable Switches

Secure Sensitive Data (SSD) Properties on Sx500 Series Stackable Switches

Configuration of TACACS+ Parameters on Sx500 Series Stackable Switches

Remote Authentication Dial-In User Service (RADIUS) Settings on Sx500 Series Stackable Switches

Management Access Authentication Setup on Sx500 Series Stackable Switches

Management Access Method Access Profile Settings on Sx500 Series Stackable Switches

Management Access Method Profile Rules Configuration on Sx500 Series Stackable Switches

Configuration of Recurring Range for 802.1x on SG500X Series Stackable Switches

Secure Shell (SSH) Client User Authentication Settings on Sx500 Series Stackable Switches

Secure Shell (SSH) Server Authentication Configuration for SSH Clients on Sx500 Series Stackable Switches

Secure Shell (SSH) Server User Authentication Settings on Sx500 Series Stackable Switches

TCP/UDP Services on Sx500 Series Stackable Switches

Password Strength Settings on Sx500 Series Stackable Switches

Storm Control Configuration on Sx500 Series Stackable Switches

Was this information helpful? Please leave us your feedback.

Version history
Revision #:
1 of 1
Last update:
‎06-17-2013 02:35 PM
Updated by:
 
Labels (1)
Comments
New Member

I noticed the TACACS doc is

• v1.2.7.76

does this work the same on the 1.3.x firmware?