I am new to this forum but not new to cisco product, i was able to resolve most issues in the past, but this one i am stuck. 2 things
1. The instructions given on this site is stale, the latest firmware with the WVC210 (1.1.1) does NOT have an option for "Alternate Port", it only has an option for "HTTP port", so i assume that this is the same as using an "alternate port"
2. I tried connecting to the camera remotely, but was not successful. I was able to connec to the router (A USR router) that it is connected to, the router's port is 8080, and i was able to access the router from work, but not the camera, I tried both port 80 and 1024. The connection just simply timed out
Network Deployment on PVC300 PTZ Internet Camera
The objective of this document is to explain the deployment setup of the PVC300 PTZ Internet Camera. There are two options for deploying the camera on the network. This artic...
Basic Setup Settings on the PVC2300 Internet Video Camera
In the Basic Setup section of the PVC2300 Internet Video Camera, any user can edit properties such as the camera name, description, time, and network settings.
Configure RTP and RTSP on PVC300 PTZ Internet Camera
Real-Time Protocol (RTP), is an Internet protocol for transmitting real-time data such as audio and video. RTP itself does not guarantee real-time delivery of data, but ...