I go to IP address of my Cisco WVC210 Wireless-G PTZ Internet Video Camera and with audio but promted me the USERNAME and PASSWORD.. Is there a way to know my USERNAME AND PASSWORD because i forgot it..
DId you change the default username/password from admin/admin?
If so, you will need to restore it to factory default.
• Restore Factory Defaults — To restore the factory default settings, press the Reset button for more than 3 seconds. The reset button can be accessed with a straightened paper clip or similar object. When you let go of the button, the LEDs on the front of the camera will flash and then return to a normal state when the camera is ready.
Network Deployment on PVC300 PTZ Internet Camera
The objective of this document is to explain the deployment setup of the PVC300 PTZ Internet Camera. There are two options for deploying the camera on the network. This artic...
Basic Setup Settings on the PVC2300 Internet Video Camera
In the Basic Setup section of the PVC2300 Internet Video Camera, any user can edit properties such as the camera name, description, time, and network settings.
Configure RTP and RTSP on PVC300 PTZ Internet Camera
Real-Time Protocol (RTP), is an Internet protocol for transmitting real-time data such as audio and video. RTP itself does not guarantee real-time delivery of data, but ...