Still having some issues with getting all the information transferred to Cisco.com The PVC2300 and WVC2300 firmware can still be found at www.linksysbycisco.com Just go to the support section and enter PVC2300 as the product. Follow the links to the download section and you should find firmware v1.0.1 released 9/29/2008.
Try this link http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1175237623773&packedargs=sku%3DPVC2300&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=2377323773B01&displaypage=download#versiondetail
We are working diligently to make this available on Cisco.com. Apologize for the difficulties and appreciate your patience.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...