I'm interested in Cisco cams using SWVMS16. I've seen two different OS requirements. A Ccisco page said that it would work with XP and Vista 32 and 64-bit. The admin guide said that it would work with Server 2003 but no bit specs. Ideally I would like to use this on Server 03 or 08 64-bit. Anybody know if this is possible?
The SWVMS16 Video Monitoring System is working with any of the 32 bits and 64 bits hardware and OS. Here are the OS that had been tested (All version of XP and Vista, 2000 server, 2003 server, and 2008 server). Testing for Windows 7 is under way to verify if there is any issue.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...