I am using the Cisco Main Console (Ver 18.104.22.168) software that comes with the camera (wvc210). I am having trouble adding a second camera to the console. When I search for camera none show up, not even the one that is already connected. I tried to mainly do this by using insert but that didn't work. I am able to connect via the web though.
Article ID:2430 Network Deployment on PVC300 PTZ Internet Camera
Objective The objective of this document is to explain the deployment
setup of the PVC300 PTZ Internet Camera. There are two options for
deploying the camera on the network. This article exp...
Article ID:2779 Basic Setup Settings on the PVC2300 Internet Video
Camera Objective In the Basic Setup section of the PVC2300 Internet
Video Camera, any user can edit properties such as the camera name,
description, time, and network settings. This docume...
Article ID:2447 Configure RTP and RTSP on PVC300 PTZ Internet Camera
Objectives Real-Time Protocol (RTP), is an Internet protocol for
transmitting real-time data such as audio and video. RTP itself does not
guarantee real-time delivery of data, but it doe...