I am using 9 WVC200 cameras with the "monitor" software. when view any camera from a browser, the audio works fine. When viewing any of the cameras through the "monitor" software (22.214.171.124) the audio has an echo sound and never works properly. What is the issue??
THanks for the info. I had been using over 9 cameras so the standard software which supports 9 was not enough and i found another linksys monitor software that worked for more cameras. in trying the software you reccomended the audio works perfectly so it must have been a compatibility issue with the other linksys monitor which i have sinced stopped using.
Network Deployment on PVC300 PTZ Internet Camera
The objective of this document is to explain the deployment setup of the PVC300 PTZ Internet Camera. There are two options for deploying the camera on the network. This artic...
Basic Setup Settings on the PVC2300 Internet Video Camera
In the Basic Setup section of the PVC2300 Internet Video Camera, any user can edit properties such as the camera name, description, time, and network settings.
Configure RTP and RTSP on PVC300 PTZ Internet Camera
Real-Time Protocol (RTP), is an Internet protocol for transmitting real-time data such as audio and video. RTP itself does not guarantee real-time delivery of data, but ...