Does anyone have an updated Active X drive for IE 8? I was able to change the security setting on some of the computers who access the WVC210 so that I could load the Active X driver (which is out of date). It would be a lot simpler if Cisco update the date in the active X driver. Does anyone know when Cisco will update the software for the WVC210 so that you will not have to lower the security level to get the active X driver to load?
------- Cisco Small Business Video Surveillance Cameras (Linksys Business Series)
then choose the camera model you have.
Once you select your camera, select the option to download the firmware. Then choose the latest firmware version. On the right side of the screen, there will be two files available for download. Choose the OCX zip file. Once you download the zip file, extract or run the application and complete the installation wizard.
The latest firmware version 1.1.0 includes an updated ActiveX component with updated certificate. The manual OCX update is no longer required. Just update the camera firmware to the latest version and the ActiveX issue will go away.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...