WVC210 and IE7 and IE8 Freeze frames and other issues
I have a WVC210 that works fine with Safari and FireFox. However, when using either IE7 or IE8 I don't get streaming video. I get an initial frame of video and nothing more. If I press "Refresh" I do get an additional frame. I can send commands to the camera without any problem but, as always, I have to Refresh to see a new frame of video.
A second issue with IE7 & 8 is that I don't see the buttons for taking a still shot of the screen or zooming. When running Safari and FireFox I don't have them either.
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...