Hi there! I am very content with my WVC210 - I have family abroad and they can see my baby girl 24/7. The speed is good and image outstanding.
HOWEVER, the following have happened: I have tried it in 3 different computers outside my house network so I imagine it's not any config problem with the users' computers; the image from the video stream goes balck (disapears), and then comes back on after a couple of seconds - like it's being refreshed.
Checking the SysLog (Streaming START and END) I can see that it's like the user has logged off, and back on again, it happens every few seconds and it's being really annoying.
Would anyone, please, be able to help me solve this problem?
Article ID:2430 Network Deployment on PVC300 PTZ Internet Camera
Objective The objective of this document is to explain the deployment
setup of the PVC300 PTZ Internet Camera. There are two options for
deploying the camera on the network. This article exp...
Article ID:2779 Basic Setup Settings on the PVC2300 Internet Video
Camera Objective In the Basic Setup section of the PVC2300 Internet
Video Camera, any user can edit properties such as the camera name,
description, time, and network settings. This docume...
Article ID:2447 Configure RTP and RTSP on PVC300 PTZ Internet Camera
Objectives Real-Time Protocol (RTP), is an Internet protocol for
transmitting real-time data such as audio and video. RTP itself does not
guarantee real-time delivery of data, but it doe...