I see the following erroneous behavior on the WVC210 (220.127.116.11) in regards to WLAN connectivity.
(1) device is wlan connected (dhpc)
(2) AP goes down for >1 hour
(3) device does not reconnect but self-assigns a private IP and becomes unreachable
Work-around: power-cycle the device upon which it reconnects to the AP.
Yet power cycling needs physical access to the unit which is not the case.
I already tried to log this issue 1 year ago. I tried logging a case but could not get a case number etc. Now with the almost latest firmware I see the very same issue which makes the device rather moot for wider use.
Article ID:2430 Network Deployment on PVC300 PTZ Internet Camera
Objective The objective of this document is to explain the deployment
setup of the PVC300 PTZ Internet Camera. There are two options for
deploying the camera on the network. This article exp...
Article ID:2779 Basic Setup Settings on the PVC2300 Internet Video
Camera Objective In the Basic Setup section of the PVC2300 Internet
Video Camera, any user can edit properties such as the camera name,
description, time, and network settings. This docume...
Article ID:2447 Configure RTP and RTSP on PVC300 PTZ Internet Camera
Objectives Real-Time Protocol (RTP), is an Internet protocol for
transmitting real-time data such as audio and video. RTP itself does not
guarantee real-time delivery of data, but it doe...