I just got SG200-26, is it possible to assign 10 static IP to say, port 2? If i can, please help with step? I greatly appreciated and big THANKS in advance.
No - you can't assign ip address to ports on an SG200 (switch). Normally when you assign ip address to ports, this is on a layer3 device/router.
Hope this helps,
Thanks Jasbryan for cleared this up for me. Can you point out a few device/router that can do this job? I would like to have the ones with web interface. also, it can be by cisco or other company. Again, I thank you.
Can you explain to me what you are trying to accomplish so i could suggested the correct router/layer 3 device for you.
I'm trying to setup a dedicated server hosting. There is an GigE with /24 IPs coming into my switch/router, I"m trying to distribute these IPs to each server, each server would have 5 or 10 IPs ect. Thanks
So you're trying to dedicate a (5 or 10) range of public ip address to one server?
Yes, that's correct.
The small business line routers/switch isn’t going to allow what you need.
Yeah you will need to move up to the enterprise small business products
Enterprise pre-sales number
You’re probably looking at ASA5505- Cisco800 series or even maybe 1900 series. Please look up spec’s and call the presales line for best choice.
Thank you for all your help.