Hi, My SG300-10 switch rebooted this morning while I was eating my breakfast cereal. The main difference from normal operation (where I don't get crashes) is that the port to the router was suspended due to port security and the switch wasn't getting an IP address from DHCP anymore (and so was correctly flashing the status LED).
Noticed in the event log around this time:
%NT_LLDP-F-ILLEGAL_VALUE: LLDP handleIpChange: hash error ***** FATAL ERROR ***** Reporting Task: BRMN. Software Version: 220.127.116.11 (date 12-Nov-2011 tim e 23:34:26) 0x169bbc 0x166760 0x696a80 0x475f3c 0x47b408 0x47b5c4 0x6ce76c 0x6d8314 0x5e7924 0x121d84 %LINK-W-Down: gi1 %LINK-W-Down: gi2 %LINK- W-Down: gi3 %LINK-W-Down: gi4 %LINK-W-Down: gi5 %LINK-W-Down: gi6 %LINK-W-Down: gi7 %LINK-W-Down: gi8 %LINK-W-Down: gi9 %LINK-W-Down: gi10 %BOOT P_DHCP_CL-W-DHCPIPCANDIDATE: The device is waiting for IP address verification on interface Vlan 1 , IP 192.168.1.254, mask 255.255.255.0, DHCP server 192.168.1
Interesting the error mentions LLDP as I have it disabled.
Anyone care about this? I am *not* a small business, I am a private individual. I have however bought a small business switch, so I appreciate there is not really the right support number for me to ring.
In my case, the suspended port bounced back on reboot (which I didn't realise would happen) the switch grabbed an IP and all was healthy again.
If you have a switch that is under warranty then you can call the same number as everyone else 1-866-606-1866. If you have or have anyone else that is having the issue please call in so we can further diagnosis the issue.
I noticed after I'd replied that while it happened again in a slightly newer firmware, the event entry was from the Flash and from a VERY long time ago. I'm happy a newer firmware has either fixed it or it's now irrelevant (I haven't used Port Security for a long time).
Either way, listing an easy to find link to the support page I think still helps the thread, so thank you :-).
Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
May 31, 2016
June 5, 2017
Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
Remote Network Monitoring (RMON) was developed by the Internet Engineering Task Force (IETF) to support...