Hi Thomas, the SX500 does support ingress rate limit and egress shaping rate. This is a quality of service configuration where you can define the Committed Information Rate and Committed Burst Rate along with the ingress and egress rate limits.
In addition, the switch also supports protect port so you may separate every port without making a hundred VLAN.
Please mark answered for helpful posts
Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
May 31, 2016
June 5, 2017
Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
Remote Network Monitoring (RMON) was developed by the Internet Engineering Task Force (IETF) to support...