Hi Remko,I guess Jody

maxmakung · ‎03-26-2014

I tried to add Cisco SG300-28 into Spicework but it doesn't work at all.

What I did

- Enabled SSH and SNMPv1 and SNMPv3 (Spicework show it's connected but can't get switch information)

- Disabled Firewall in Windows7

- I can use Putty to download running-config and startup-up confing from this switch into TFTP in spicework

Firmware:
SW version 1.3.7.18 ( date 12-Jan-2014 time 18:02:59 )
Boot version 1.3.5.06 ( date 21-Jul-2013 time 15:12:10 )
HW version V01

Switch log:
2014-Mar-27 09:05:06 Warning %SNMP-W-SNMPAUTHFAIL: Access attempted by unauthorized NMS
2014-Mar-27 09:05:06 Warning %AAA-W-REJECT: New ssh connection, source 10.2.101.13 destination 192.168.100.25 REJECTED, aggregated (2)
2014-Mar-27 09:05:06 Warning %AAA-W-REJECT: New ssh connection, source 10.2.101.13 destination 192.168.100.25 REJECTED
2014-Mar-27 09:04:32 Informational %AAA-I-DISCONNECT: User CLI session for user cisco over ssh , source 10.2.101.13 destination 192.168.100.25 TERMINATED. The Telnet/SSH session may still be co nnected.

Please kindly advise to solve this issue.

Thank you very much

mohabdel · ‎03-31-2014

Hi Max,

I see here you try to connect to SNMP program and this program use SSH. I like to see your config file and I will try it with my own switch. Also about Spicework, it is free program?

Thanks,

Moh

maxmakung · ‎04-01-2014

I will send switch configuration to your email.
please kindly provide your email address.

Yes, Spicework is a free program.

Spicework download link below
http://www.spiceworks.com/download/

Thank you very much.

mohabdel · ‎04-01-2014

Hi Max,

Could you do show run and copy SSH and SNMP sections and port them here?

Thanks,
Moh

maxmakung · ‎04-01-2014

config-file-header
bkk-sw-25
v1.3.7.18 / R750_NIK_1_35_647_358
CLI v1.0
set system mode switch

ip ssh server
ip ssh password-auth
ip ssh pubkey-auth auto-login
crypto key pubkey-chain ssh
user-key admin rsa
key-string row AAAAB3NzaC1yc2EAAAADAQABAAAAgQDFMQiPsbOX
key-string row MMNocuKtdU2H/YOJvyZrDHrOennUGSGdffOCHBMg
key-string row v22OPzzO5fci3JTTv/Gck5Eo6HxadTjEQPgdqoxH
key-string row qoKZeLkASgVQ+ww4/uFHOYowX7xCN4kf
key-string row fxHCYiMCiHY23IVx6TYl8Yf9vWTf0q6N0WTd9/8j
key-string row 5h/U0yN6FQ==
exit
exit
snmp-server server
snmp-server engineID local 8000000903b8621fd588eb
snmp-server location "IT ROOM"
snmp-server community ciscosg300 ro view Default
snmp-server host 10.2.101.13 version 3 auth administrator udp-port 161
snmp-server group spicework v3 auth notify Default read Default write Default
encrypted snmp-server user administrator spicework v3 auth md5 jblmaMDCgbwhZ7DbT6DjE40YbGf6uBm1N12M7Xb6TZ0=
ip http timeout-policy 1800 http-only
no ip http secure-server
clock timezone ICT 7
clock source sntp
sntp unicast client enable
sntp unicast client poll
sntp server 10.2.101.1
!
interface vlan 1
no ipv6 address autoconfig
no ipv6 enable
no ipv6 dhcp client stateless
!
interface vlan 5
name VLAN_GUEST
!
interface vlan 10
name VLAN_LAN
!
interface vlan 20
name VLAN_MEDIA
!
interface vlan 30
name VLAN_WIFI_PUBLIC
!
interface vlan 40
name VLAN_ISP1
!
interface vlan 50
name VLAN_ISP2
!
interface vlan 60
name VLAN_TEST1
!
interface vlan 70
name VLAN_TEST2
!
interface vlan 100
name VLAN_MGMT
ip address 192.168.100.25 255.255.255.192
!
interface gigabitethernet1
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 30
lldp med enable
!
interface gigabitethernet2
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 30
lldp med enable
!
interface gigabitethernet3
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet4
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet5
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet6
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet7
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet8
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet9
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet10
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet11
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet12
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet13
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet14
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet15
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet16
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet17
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet18
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 10
lldp med enable
!
interface gigabitethernet19
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 60
lldp med enable
!
interface gigabitethernet20
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 60
lldp med enable
!
interface gigabitethernet21
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 60
lldp med enable
!
interface gigabitethernet22
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 60
lldp med enable
!
interface gigabitethernet23
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 40
lldp med enable
!
interface gigabitethernet24
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 40
lldp med enable
!
interface gigabitethernet25
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 50
lldp med enable
!
interface gigabitethernet26
storm-control broadcast enable
storm-control broadcast level kbps 3500
storm-control include-multicast unknown-unicast
port security mode max-addresses
port security discard
spanning-tree bpduguard enable
switchport mode access
switchport access vlan 50
lldp med enable
!
interface gigabitethernet27
storm-control broadcast enable
storm-control broadcast level kbps 50000
storm-control include-multicast unknown-unicast
switchport trunk allowed vlan add 5,10,20,30,40,50,60,70,100
lldp med enable
!
interface gigabitethernet28
storm-control broadcast enable
storm-control broadcast level kbps 50000
storm-control include-multicast unknown-unicast
switchport trunk allowed vlan add 5,10,20,30,40,50,60,70,100
lldp med enable
!
exit
ip default-gateway 192.168.100.1
encrypted ip ssh-client key rsa key-pair

Remko de Koning · ‎12-12-2014

Hi, did you ever got this working? Looking for the same thing.

Also tried alternatives via Putty and input files to automate backups of these devices.

So far without luck.

Remko

Aleksandra Dargiel · ‎12-15-2014

Hi Remko,

I guess Jody answered your question.

https://supportforums.cisco.com/discussion/12375366/login-ssh-without-user-name-and-password

Automatic login was added only with 1.2.9 release.

Aleksandra

Cisco SG300 with Spicework via SSH

Cisco Business Product Family

Cisco Switching Product Family