CISCO SG500X-48 with FOSH SFP+ FTLF8526P3BNL transceiver module
Hi we have counter issue when plugging sfp+ transceiver module to sg500x-48 with standalone configuration we are getting 1gb instead of 6.5gb or 10gb. Is there compatibility issues transceiver module (FTLF8526P3BNL).
I did a google search on the ID FTLF8526P3BNL you have given us, and it looks like it's from a 3rd party vendor Finisar
Sadly, cisco cannot guarantee performance on that SFP The document I gave you earlier (hope you clicked the link) shows all the assured/supported SFPs. 3rd Party SFPs, when you use them, are at your own risk. (This not only applies to Cisco but as well to other switch vendors)
Lastly, I think, based on checking the datasheet of Finisar's FTLF8526P3BNL(CLICK HERE). It advertises the SFP as a6Gbps, but Cisco does NOT support that kind of speed. So, tendency, it will go down to 1Gbps
Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
May 31, 2016
June 5, 2017
Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
Remote Network Monitoring (RMON) was developed by the Internet Engineering Task Force (IETF) to support...