I wish you are fine .......... Kindly i have a question regarding Cisco Small Business 500 Series Switches ....... This series has reset button in the front panel ...... This button can be used to manually restart the switch or restore factort defaults configuration
Is their any way to disable the functionality of this button ???? The reason for that , I have a customer that will put the switch in unsafe & unsecure place and doesn't need any one to restore default configuration of the switch by mistake or on purpose
Hi Ahmed, there is not an option to disable this button. If it is absolutely impossible to lock the switch somewhere secure I'd recommend to use some tape and put over the button or secure something over the button so it's not easily tampered.
-Tom Please mark answered for helpful posts
Please mark answered for helpful posts
Introduction:Topology Diagram:Configuration Overview:Related
Information: Introduction: This document describes how to connect SG300
with Catalyst switch via STP. Spanning Tree Protocol (STP) is a Layer 2
protocol that runs on mainly on switches. The spec...
The Sx500 Series Stackable Switches offers different port features. You
can add security to a port, make the port more energy efficient, map a
VLAN to a port, make a port available or not to a specific network
portion, and so forth. The next set of articl...
Recently, HP Networking published a blog post attempting to counter the
favorable third party Miercom report on our Cisco® 200 and 300 Series
Smart and Managed switches: