Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Cisco Employee

Convert CE500 config to 2960

Is there any tool to port a CE500 configuration over to 2960.  The CE500 config has much more than is needed.  Is it required for the process to be done manually?

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Bronze

Re: Convert CE500 config to 2960

Checked with the 2960 team and unfortunately this is manual today.

Cisco Employee

Re: Convert CE500 config to 2960

No "porting" tool.  Different device platforms with different means of configuring/managing them (CCA or on-board UI for the CE500 & CNA or CLI for the 29XX).  Looks like manual is the only way unfortunately.

Regards,

Glenn

3 REPLIES
Bronze

Re: Convert CE500 config to 2960

Checked with the 2960 team and unfortunately this is manual today.

Cisco Employee

Re: Convert CE500 config to 2960

No "porting" tool.  Different device platforms with different means of configuring/managing them (CCA or on-board UI for the CE500 & CNA or CLI for the 29XX).  Looks like manual is the only way unfortunately.

Regards,

Glenn

Cisco Employee

Re: Convert CE500 config to 2960

Thank you.

Mark

2371
Views
0
Helpful
3
Replies
CreatePlease to create content