First you will have to set up a static IP address on the switch and then disable the DHCP server on the router since having two DHCP servers for one subnet will cause trouble.
Second, you can go to "IP Configuration"->"DHCP Server", enable it from "Properties" and then go to "Network Pools" where you set the IP pool of the DHCP, as well as the default gateway (Option 3) and DNS server (Option 6).
If you are experiencing further problems configuring your DHCP server, please call us at the corresponding phone number for your country:
i have a router that give all the internet and this router have wifi for wireless connection's and it's mush have dhcp server.
i need to connect the router to port PE1 in the switch and the switch release ip's from the router dhcp server from port PE2 . and i need to make dhcp server in the swith the release ip's from PE3-PE8 with the swith dhcp server.
Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
May 31, 2016
June 5, 2017
Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
Remote Network Monitoring (RMON) was developed by the Internet Engineering Task Force (IETF) to support...