Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Do we have MIB (OID value) to monitor (SNMP) the CPU load of the SF200/SF300

History:

When the Linksys Cisco SMB switches were rebranded they came out with the SF200/SF300 series.

Both of those offer a SNMP read/write/trap.

 

My focus is just monitoring with SNMPv1 only.

Get all kind of various counters for uptime, traffic, packets (number and sizes), etc etc etc.

The one thing that I miss is the CPU load OID.

I assume that this values should be readable (available) from the swithches.

I have tried to find the MIB or default values and ran a few snmpwalk´s in my quest.

I have created custom counters etc etc .

But not had any luck yet :-(

 

Is there anyone out there that knows the OID and can share it ?

 

Appreciate your input here.

3 REPLIES
Cisco Employee

Hi,Please try:CPU utilization

Hi,

Please try:

CPU utilization for 5 seconds

.1.3.6.1.4.1.9.6.1.101.1.7.0

CPU utilization for 1 minutes

.1.3.6.1.4.1.9.6.1.101.1.8.0

CPU utilization for 5 minutes

.1.3.6.1.4.1.9.6.1.101.1.9.0

 

 

Regards,

Aleksandra

 

New Member

Hi The OID´s do return values

Hi

 

The OID´s do return values which is good.

But I´ve not been able to verify that this is inline with the acutal CPU load as shown via the GUI (Administration-Diagnostics-CPU utilisation)

 

Someone (thread in support community) pointed out that these values are number of packets sent to the CPU rather than the load of CPU?

 

CPU utilization for 5 seconds

.1.3.6.1.4.1.9.6.1.101.1.7.0

CPU utilization for 1 minutes

.1.3.6.1.4.1.9.6.1.101.1.8.0

CPU utilization for 5 minutes

.1.3.6.1.4.1.9.6.1.101.1.9.0

 

Can someone challenge that or verify the correctness of that statement?

 

Thank you for you input here.

New Member

Hi, That's great Aleksandra,

Hi,

 

That's great Aleksandra, is these OIDs valid for all type of Cisco devices ? Also do you happen to know the OID for Memory too ?

 

I'm looking for the above OIDs for my company and we use various Cisco devices eg 6509, 6506, 3750, 2811 and others

 

Many thanks in advance

536
Views
0
Helpful
3
Replies
CreatePlease to create content