I have deployed a new ESW 520 24 port with a UC520 system at a new site. The switch has been crashing periodically. Here is the error from the logs:
2147474387 11-Dec-2009 14:26:49 Emergency %SYSLOG-F-OSFATAL: FATAL ERROR: SW2M: ABORT DATA exception ***** FATAL ERROR ***** SW Version : 2.0.3 Version Date: 18-May-2009 Version Time: 19:32:29 Instruction 0x15F760 Exception vector 0x10 Program state register 0x20000013 0x0015f720 0x0091dfe0 0x06bf772c 0x014b6d0c %M NG_DIAG-E-DIAGATINIT: Init: Entries can't be created %MNG_DIAG-E-DIAGATINIT: Init: Wrong status received ***** END OF FATAL ERROR *****
I have not had any luck finding anything on this. It seems to occur about every 2 weeks since we have placed it out there. Does anyone have any ideas on this ?
Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports
May 31, 2016
June 5, 2017
Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
Remote Network Monitoring (RMON) was developed by the Internet Engineering Task Force (IETF) to support...