Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ESW 520 8-port - firmware upgrade

Hi,

We have a ESW 520 8-port currently on firmware version 2.1.1.19 (boot version 1.0.0.07, VID V01) - Serial number CBT15100AN2

The latest firmware version is 2.1.1.21, which we downloaded and via Maintenance, Software Upgrade, via HTTP performed an upgrade to this latest version - the upgrade appears to complete, logs show successful however when we restart the switch it still shows as 2.1.1.19 . Very strange!

Can someone please advise how to get the upgrade to successfully apply?

Kindest regards,

Dale. 

1 ACCEPTED SOLUTION

Accepted Solutions

ESW 520 8-port - firmware upgrade

Hi Dale,

Did you change the active firmware image to the new version before restarting? (Maintenance -> File Management -> Active Image)

Best,

David

Please rate helpful posts and identify correct answers.

3 REPLIES

ESW 520 8-port - firmware upgrade

Hi Dale,

Did you change the active firmware image to the new version before restarting? (Maintenance -> File Management -> Active Image)

Best,

David

Please rate helpful posts and identify correct answers.

Community Member

ESW 520 8-port - firmware upgrade

David,

Thanks for such a question reply - I had tried that and after reboot still shows as 2.1.1.19

I decided to install the firmware upgarde again, change the active firmware to 2.1.1.21 again, restarted and this time it held.

Thank you for your assistance, all resolved.

Cheers,

Dale.

ESW 520 8-port - firmware upgrade

Dale,

Glad to hear its all resolved

Best,

David

Please rate helpful posts and identify correct answers.

1187
Views
0
Helpful
3
Replies
CreatePlease to create content