Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

hj
New Member

EWS-520-24POE Cant Power AP1131

Hey i have this issu with a Cisco AP1131 it keeps saying:

Due to insufficient inline power. Upgrade inline power source or install power injector.

I have 4 Accesspoint on the switch and thats all.

4 REPLIES
New Member

Re: EWS-520-24POE Cant Power AP1131

The 1131 supports both ILP and 802.3af. It is likely that "config ap power pre-standard enable" is configured. I would post here and ask how to set it for 802.3af exclusively.

Regards,

Christopher

Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main  This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.

SB Support Community Support Area ----> NetPro Forum

- Voice and Conferencing ----> Unified Communications and Video Forum http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Unified_Communications_and_Video_discussion

- Security and Surveillance ----> Security Forum http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Security_discussion

- Wireless ----> Wireless - Mobility http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Wireless_-_Mobility_discussion

- Network Storage ----> Data Center Forum http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Data_Center_discussion

- Routers ----> Network Infrastructure Forum http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Network_Infrastructure_discussion

- Switches ----> Network Infrastructure Forum http://forum.cisco.com/eforum/servlet/NetProf;jsessionid=E0EEC3D9CB4E5165ED16933737822748.SJ3A?page=Network_Infrastructure_discussion

Bronze

Re: EWS-520-24POE Cant Power AP1131

Hello, I hope this finds you doing well.

Please upgrade the firmware to 2.0.3.  Here is a link with helpful resources as well as a link to the firmware:

https://www.myciscocommunity.com/docs/DOC-7615

I do not have a reference page to point to, but as I understand it the negotiation of POE for these APs is fixed with the latest firmware.  Please check the version that you are running and or upgrade.

Can you update us when you are done?  Many thanks in advance, kindest regards,

Andrew

hj
New Member

Re: EWS-520-24POE Cant Power AP1131

I upgrande the switch today and it work :) so now the AP is up and running.

Thanks guys

Bronze

Re: EWS-520-24POE Cant Power AP1131

Glad to hear it!!!  Have a great day,

Andrew

2832
Views
0
Helpful
4
Replies
CreatePlease to create content